English 
 |
The addressable LED ring contains 12 individually controlled RGB LEDs with intelligent IC SK6812 WS2812B inside, widely used for DIY lighting. Controlled through Arduino or microcontroller, making an amazing visual impact for some electronics projects.
We are direct factory supply these neopixel rings with competitive price and quite good quality.
Product introduction:
The addressable LED ring contains 12 individually controlled RGB LEDs with intelligent IC SK6812 WS2812B inside, widely used for DIY lighting. Controlled through Arduino or microcontroller, making an amazing visual impact for some electronics projects.
We are direct factory supply these neopixel rings with competitive price and quite good quality.
Product parameters:
Model | IC Qty per meter | Color | LED Qty per meter | Power Consumption | Voltage | PCB Size |
W/M | V/DC | mm | ||||
STNP-SK6812RGB-12-5V | 12 | Addressable RGB | 12 | ≤14.4W | 5v | Outer diameter: 36.8mm Inner diameter: 23.3mm |
Product details
1. DC5V input voltage. We can provide 1led / 12led / 16led / 24 led / 32led. the Power is 0.3W / 3.6w / 4.8w / 7.2w / 9.6w.
2. Each neopixel could be individually addressable.
3. Round shape with 3 pins connector,
4. The rings are 'chainable' - connect the output pin of one to the input pin of another then these pixel rings could be connected easily..
5. The led RGB ring can be controlled by bluetooth / wifi /SD card controller to reach flashing effect
6. Circle outer diameter of 36.8mm and inner diameter of 23.3mm
7. One-wire digital control interface, no clock line
How to control the Addressable LED ring through Arduino Platform
Our team in Guangzhou lighting fair.
DIY with addressable led ring:
1. Create festive holiday lights
2. Beautiful jewelry that changes color with your touch
3. Magic costume unicorn horn that lights up with your touch
4. Back lights, cabinet lights, edge light, architectural lights for corridor, canopy, archway, lights for path and contour marking; etc
Installation Notice:
1) Make sure the connection is correct according to the diagram
2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value
3) Keep the surface of installation clean and smooth avoid breaking off
4)In order to protect the product and extend the lifespan pls not crook the position of LED and other components.
Product introduction:
The addressable LED ring contains 12 individually controlled RGB LEDs with intelligent IC SK6812 WS2812B inside, widely used for DIY lighting. Controlled through Arduino or microcontroller, making an amazing visual impact for some electronics projects.
We are direct factory supply these neopixel rings with competitive price and quite good quality.
Product parameters:
Model | IC Qty per meter | Color | LED Qty per meter | Power Consumption | Voltage | PCB Size |
W/M | V/DC | mm | ||||
STNP-SK6812RGB-12-5V | 12 | Addressable RGB | 12 | ≤14.4W | 5v | Outer diameter: 36.8mm Inner diameter: 23.3mm |
Product details
1. DC5V input voltage. We can provide 1led / 12led / 16led / 24 led / 32led. the Power is 0.3W / 3.6w / 4.8w / 7.2w / 9.6w.
2. Each neopixel could be individually addressable.
3. Round shape with 3 pins connector,
4. The rings are 'chainable' - connect the output pin of one to the input pin of another then these pixel rings could be connected easily..
5. The led RGB ring can be controlled by bluetooth / wifi /SD card controller to reach flashing effect
6. Circle outer diameter of 36.8mm and inner diameter of 23.3mm
7. One-wire digital control interface, no clock line
How to control the Addressable LED ring through Arduino Platform
Our team in Guangzhou lighting fair.
DIY with addressable led ring:
1. Create festive holiday lights
2. Beautiful jewelry that changes color with your touch
3. Magic costume unicorn horn that lights up with your touch
4. Back lights, cabinet lights, edge light, architectural lights for corridor, canopy, archway, lights for path and contour marking; etc
Installation Notice:
1) Make sure the connection is correct according to the diagram
2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value
3) Keep the surface of installation clean and smooth avoid breaking off
4)In order to protect the product and extend the lifespan pls not crook the position of LED and other components.
