Digital led strip is widely used for car decoration , amusement park and theater lighting industry. WS2811 strip could be programmable through Arduino , Raspberr pi controller
30leds/m 48leds/m 60leds/m are all available.
Professional working on WS2811 led strip, we could give you cheap factory price. Welcome to visit our factory.
Availability: | |
---|---|
Product introduction:
Digital led strip is widely used for car decoration , amusement park and theater lighting industry. WS2811 strip could be programmable through Arduino , Raspberr pi controller
30leds/m 48leds/m 60leds/m are all available.
Professional working on WS2811 led strip, we could give you cheap factory price. Welcome to visit our factory.
Product parameters:
Model | IC Qty per meter | Color | LED Qty | Power Consumption | Voltage | PCB Size |
W/M | V/DC | mm | ||||
ST-WS2811RGB-60-12V | 20 | Addressable RGB | 60 | ≤14.4W | 12v | Double Copper PCB 5000*10mm |
Product details
1. PCB width could be chose , normal is 10mm width.
2. Each 3 rgb chips could be cut,
3. Print your logo on the PCB, we have professional engineer team to satisfy you needs.
4. FPCB is normally 2oz, 3oz is available too
5. Recommended power supply is more reasonable, which is generally 70-80% of rated power load, in order to avoid long-term high load power supply to damage
6. Energy saving and environmental conservation,ECO-friendly,NO mercury
7. Grey level of the Arduino led strip is 256
8. High brightness RGB chip, low decay
9. Easy installation could be used for indoor and outdoor
WS2811 digital RGB led strip diagram below
Please check connection diagram picture below
Our booth in Guangzhou lighting fair
Arduino controlled led strip application:
City skyline lighting villas advertising wall signs Christmas (decorative landscape)
Irregular design of body decoration (shopping malls, hotels, nightclubs, polygonal wall KTV)
Establishments ceiling cavity design
Installation
1.Please read the specifications carefully before installation
2.Not use acidic glue to fix the arduino strip light
3.12v input, do not use higher voltage otherwise will be burned
4.Recommend to use parallel, because if more than 5 meters ,the lighting is not uniform enough
Product introduction:
Digital led strip is widely used for car decoration , amusement park and theater lighting industry. WS2811 strip could be programmable through Arduino , Raspberr pi controller
30leds/m 48leds/m 60leds/m are all available.
Professional working on WS2811 led strip, we could give you cheap factory price. Welcome to visit our factory.
Product parameters:
Model | IC Qty per meter | Color | LED Qty | Power Consumption | Voltage | PCB Size |
W/M | V/DC | mm | ||||
ST-WS2811RGB-60-12V | 20 | Addressable RGB | 60 | ≤14.4W | 12v | Double Copper PCB 5000*10mm |
Product details
1. PCB width could be chose , normal is 10mm width.
2. Each 3 rgb chips could be cut,
3. Print your logo on the PCB, we have professional engineer team to satisfy you needs.
4. FPCB is normally 2oz, 3oz is available too
5. Recommended power supply is more reasonable, which is generally 70-80% of rated power load, in order to avoid long-term high load power supply to damage
6. Energy saving and environmental conservation,ECO-friendly,NO mercury
7. Grey level of the Arduino led strip is 256
8. High brightness RGB chip, low decay
9. Easy installation could be used for indoor and outdoor
WS2811 digital RGB led strip diagram below
Please check connection diagram picture below
Our booth in Guangzhou lighting fair
Arduino controlled led strip application:
City skyline lighting villas advertising wall signs Christmas (decorative landscape)
Irregular design of body decoration (shopping malls, hotels, nightclubs, polygonal wall KTV)
Establishments ceiling cavity design
Installation
1.Please read the specifications carefully before installation
2.Not use acidic glue to fix the arduino strip light
3.12v input, do not use higher voltage otherwise will be burned
4.Recommend to use parallel, because if more than 5 meters ,the lighting is not uniform enough